part 1 and
by clicking on the links
I need to make a cross piece for the back of the unit. This has to be something that I can easily take on and off the ladder parts and move to different locations for craft shows or displays.
I'm using old barn board for the shelves and just lightly sanded them and trimmed all the boards to the same length.
I decided to use another piece of barn board ripped down the middle with a bolt and nut holding the two halves together . That way it can be stored or transported with the two arms stacked one on top of the other and can open up like scissors when needed.
I attached the bolt and then unfolded the arms so that the width of the unit would be about 4' as the length of my boards is about 56".
I marked the angle of the floor at this point and cut the bottom of each arm at this angle and then screwed through, attaching the arms to the bottom (back) of the ladder section.
The top of the arms is screwed similarily to the top of the ladders.
The top plank was screwed into the top rungs to make the unit more solid, the others are just sitting on the rungs. It's easy to take apart and transport. Two ladders, the folded up cross piece and five shelf boards.
Here is the finished shelving unit with some of my signs and things on it:
Linking to blog parties at:
Funky Junk Interiors
The Shabby Chic Cottage
Blue Cricket Design
The DIY Showoff
Under the Table and Dreaming
Tools are for Women Too
It's So Very Cheri
Everything I make is for sale, so if you see something you like, please contact me.
Labels: barn board, furniture, logs