Barn Board Jar Holders

Here are a few Mason jar holders I just made from 1" thick barn board.





I left the angle that was on the ends of my boards at the top and then cut the lower ends straight across.

The bottom piece fits into a rabbet at the lower edge of the back piece.





I have routed out a circular area, about half the thickness of the wood which allows a mason jar to sit into it.









I made three of these, two are 15 3/4" high x 5 3/4" wide, the one just above with a flatter angled top is 13 1/4"  h x 5 1/2" wide.  They are all coated with tung oil and there is a sawtooth hanger on the back.  I wrap the top of the jar with twine and hot glue it on.


Posting at the following blog parties:
farmhouse decor
Farmhouse Friday
My Repurposed Life
aka design
Common Ground
Funky Junk Interiors
Too Much Time on my Hands
Sew Woodsy
Brambleberry Cottage
Coastal Charm
Cedar Hill Ranch

Labels: , ,