Letter and Number Tiles

I'm sure many of you have seen and even made blocks with letters on them.  This is something a bit different that I came up with.

I made these letters and numbers out of leftover 2 1/2" wide and 3/4" thick wood strapping, that I believe was about 8' long. This type of strapping is used in construction and has slightly curved edges, which gives a nice finish.



Each length of strapping was first grooved on one long edge and then I cut away to leave a tongue on the opposite edge.  Obviously the tongue has to fit the groove! I showed making grooves here in this link

After the long piece is done, I cut it up into pieces that were 2 3/4" long.

You can see here how they fit together.  It's not too tight and not too loose, so they can sit upright on a shelf, but are not so tight that you can't move them around.


Each tile was then painted white and then I hand painted letters and numbers on them.  I used a basic font that I had on my computer and enlarged to the correct size, about 1 7/8" tall.  I printed them out on my printer and used carbon paper between the paper and the wood tile to transfer the outlines of the letters. Then I filled in the letters with black craft paint.

After painting, I used sandpaper to distress the letters and also added a bit of glaze mixed with brown paint. When that dried, I also coated them with a clear coat.





I sell them at my booth for $2 each and they are liked by children the most, although some young women like to buy their name and a heart and their boyfriend's name, or just I ♥ U!

Here's a few samples:





Everything I make is for sale, please contact me if you are interested.  
I also do custom orders of all my products.


With this blog post:


Sharing at the following blogs:
My Repurposed Life
Funky Junk Interiors
Jennifer Rizzo
Homespun Happenings
Beyond the Picket Fence
aka design
Shabby Art Boutique
Under the Table and Dreaming
Knick of Time
Cedar Hill Cowgirl Up
Elizabeth & Co.
Faded Charm